China OEM China Factory Weasler 12 Series PTO Shaft With Slip Clutch near me shop

China Manufacturing unit Weasler 12 Sequence PTO Shaft With Slip Clutch

Technical specs of weasler 12 collection PTO shaft

Bore 1 Minus End Yoke
Bore 2 Minus Stop Yoke
Compressed (Closed) Size forty one.00 inches 1041 mm
Compressed Total Duration 49.12 inches 1248 mm
Link one YOKE ARMS
Link two YOKE ARMS
Prolonged Size 69.seventy five inches 1772 mm
Extended All round Length seventy seven.87 inches 1978 mm
HP@1000RPM 29 HP 22 kilowatts
HP@540RPM 19 HP 14 kilowatts
Size forty nine.12 inches 1248 mm
Outside Diameter six.00 inches 152 mm
Shipping Proportions 41″ L  ×  6″ H  ×  6″ W 104cm L  ×  15cm H  ×  15cm W
Shipping Quantity 1476.00 inthree 24187 cmthree
Transport Weight 23.70 lbs . eleven kilograms
Excess weight 23.70 kilos 11 kilograms

Weaster twelve Collection PTO Shaft Components

Weasler 6 Collection implement yoke


 Round Bore

  • three/4″ Spherical Bore (Dim. A)
  • With 3/16″ Standard Keyway and Established Screw
  • 7/8″ Round Bore (Dim. A)
  • With 3/16″ Standard Keyway and Established Screw
  • fifteen/16″ Round Bore (Dim. A)
  • With 1/4″ Common Keyway and Established Screw
  • 1″ Spherical Bore (Dim. A)
  • With 1/4″ Regular Keyway and Established Screw
Hex Bore
  • one-1/8″ Hex Bore (Dim. A)
  • With Set Screw
Square Bore
  • 7/8″ Sq. Bore (Dim. A)
  • With Set Screw
  • 1″ sq. bore (Dim. A)
  • With Established Screw
  • one-1/8″ sq. bore (Dim. A)
  • With Set Screw
  • one-1/4″ square bore (Dim. A)
  • With Set Screw

Shear Pin Yoke

  • 1″ Spherical Bore (Dim. A)
  • With 1/4″ Pin Hole

PTO Shafts Parts and factors

It is crucial that you realize sizes, measuring, horsepower, and agriculture PTO shaft elements to pick the correct PTO shaft for your farm machinery. Even though the yokes and U-joints are necessary for perform, the safety chains and shield are important components of the PTO shaft to keep you protected in the course of use.

  • Inner Yoke- There are 2 situated at equally ends of the PTO shaft -tractor and apply. This is welded to the generate finish.
  • Universal Joint- There are 2 at both ends of the PTO shaft.
  • Exterior Yoke- There are 2 at equally ends of the PTO shaft. It has a “Y” shape to join to the U-joint and a female hole.
  • Security Chains- The chains safe the PTO shaft on to the equipment and the tractor.
  • Protection Defend- These cones are located on equally finishes.
Tractor Yoke Cross & Bearing Package Shaft Shaft Weld Yoke
Slip Sleeve Tube Tube Weld Yoke Apply Yoke
Yoke & Shaft Assembly Yoke & Tube Assembly Drivelines Guard & Guard Bearing

Other brand names and models of PTO shaft

We can produce all these versions with good quality assurance

Bondioli & Pavesi BY2     BYP4, S4     BY5, S6     BYP6, S7     BYP7, S8, HB     BYP8, S9      BYP10     BYP SH    BYP SO
Walterscheid 2100    2200    2300    2400    2500    2600    2700    2800
Weasler six series     12 series     14 series     35 series     44 series     55 series     77 sequence

We Also Provide Agricultural gearboxes.

If you also want the agricultural gearboxes, click here:https://www.ever-energy.web/agricultural-gearbox/.

Our manufacturing unit is a major manufacturer of PTO shaft yoke and universal joint.
We manufacture substantial-good quality PTO yokes for a variety of autos, construction machinery, and products. All goods are built with rotating lighter.

Q1: Are you a buying and selling organization or maker?
A: We are a manufacturing unit.
Q2: How lengthy is your supply time and shipment?
1. Sample Guide-moments: typically 10 workdays.
2. Manufacturing Lead-times: 20-40 workdays soon after getting your deposit.

Q3. What are your conditions of payment?
A: T/T thirty% as deposit, and 70% ahead of shipping.

This fall: What are your positive aspects?
1. Company, the most competitive price tag and good good quality.
2. Perfect technical engineers give you the greatest help.
3. OEM is available.
4. Wealthy stock and fast supply.

Q5. What do you do up coming if you cannot discover the product on our internet site?
You should send out us inquiries with item photos and drawings by e mail or other ways, and we are going to check.


How to notify if your driveshaft wants replacing

What is the trigger of the unbalanced travel shaft? Unstable U-joint? Your vehicle may possibly make clicking noises whilst driving. If you can hear it from each sides, it might be time to hand it above to the mechanic. If you might be not sure, read through on to learn a lot more. Fortunately, there are a lot of ways to inform if your driveshaft demands replacing.


An unbalanced driveshaft can be the resource of unusual noises and vibrations in your vehicle. To resolve this issue, you should speak to a expert. You can try a amount of factors to fix it, which includes welding and modifying the fat. The adhering to are the most widespread methods. In addition to the techniques previously mentioned, you can use standardized weights to harmony the driveshaft. These standardized weights are connected to the shaft by welders.
An unbalanced push shaft typically creates lateral vibrations for every revolution. This variety of vibration is typically caused by a destroyed shaft, lacking counterweights, or a overseas object caught on the travel shaft. On the other hand, torsional vibrations arise twice for each revolution, and they are triggered by shaft stage shifts. Lastly, vital pace vibration occurs when the RPM of the travel shaft exceeds its rated potential. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the best task. To stay away from the difficulty of manual balancing, you can choose to use standardized weights. These weights are fastened on the outer circumference of the generate shaft. The operator can manually placement the excess weight on the shaft with unique instruments, or use a robotic. However, handbook balancers have numerous negatives.


When the angular velocity of the output shaft is not consistent, it is unstable. The angular velocity of the output shaft is .004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque used to it is too considerably for the machine. It may possibly be a excellent concept to verify the rigidity on the shaft.
An unstable generate shaft can lead to a lot of noise and mechanical vibration. It can lead to premature shaft tiredness failure. CZPT studies the impact of shaft vibration on the rotor bearing system. They investigated the result of flex coupling misalignment on the vibration of the rotor bearing program. They believe that the vibrational reaction has two components: x and y. Nevertheless, this technique has restricted application in several scenarios.
Experimental outcomes show that the presence of cracks in the output shaft may mask the unbalanced excitation qualities. For case in point, the existence of superharmonic peaks on the spectrum is characteristic of cracks. The existence of cracks in the output shaft masks unbalanced excitation attributes that cannot be detected in the transient reaction of the input shaft. Figure 8 shows that the frequency of the rotor raises at crucial velocity and decreases as the shaft passes the organic frequency.


If you’re getting trouble driving your auto, probabilities are you have run into an unreliable driveshaft. This kind of drivetrain can lead to the wheels to stick or not change at all, and also limit the total manage of the vehicle. Whatsoever the explanation, these concerns should be solved as soon as possible. Here are some signs to seem for when diagnosing a driveshaft fault. Let’s just take a nearer seem.
The very first symptom you may possibly observe is an unreliable travel shaft. You could really feel vibrations, or listen to noises underneath the motor vehicle. Depending on the lead to, it could be a damaged joint or a broken shaft. The great information is that driveshaft repairs are normally fairly economical and take considerably less time than a comprehensive drivetrain substitute. If you’re not confident what to do, CZPT has a guide to changing the U-connector.
1 of the most common symptoms of an unreliable driveshaft is clanging and vibration. These appears can be triggered by worn bushings, unfastened U-joints, or ruined center bearings. This can trigger severe vibration and sounds. You can also truly feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a greater difficulty.

Unreliable U-joints

A vehicle with an unreliable U-joint on the generate shaft can be harmful. A bad u-joint can avoid the motor vehicle from driving appropriately and may even result in you difficulty. Unreliable u-joints are inexpensive to change and you need to attempt getting components from high quality companies. Unreliable U-joints can trigger the vehicle to vibrate in the chassis or gear lever. This is a sure indication that your automobile has been neglected in servicing.
Replacing a U-joint is not a complicated activity, but it needs specific tools and a lot of elbow grease. If you do not have the appropriate equipment, or you’re unfamiliar with mechanical terminology, it really is very best to look for the assist of a mechanic. A specialist mechanic will be in a position to correctly assess the difficulty and suggest an proper answer. But if you do not feel confident adequate, you can exchange your own U-connector by adhering to a few basic actions.
To guarantee the vehicle’s driveshaft is not ruined, verify the U-joint for dress in and lubrication. If the U-joint is worn, the metal parts are most likely to rub towards every single other, causing put on. The sooner a dilemma is diagnosed, the more rapidly it can be fixed. Also, the more time you wait, the much more you drop on repairs.

damaged drive shaft

The driveshaft is the part of the car that connects the wheels. If the driveshaft is damaged, the wheels may quit turning and the automobile might gradual down or end moving entirely. It bears the weight of the auto alone as nicely as the load on the road. So even a slight bend or split in the drive shaft can have dire consequences. Even a piece of unfastened metal can turn into a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft might be ruined. When this transpires, harm to the u-joint and too much slack in the push shaft can result. These circumstances can even more hurt the drivetrain, such as the entrance half. You should substitute the driveshaft as soon as you discover any signs. Following changing the driveshaft, you can begin looking for signs of use.
A knocking audio is a sign of hurt to the travel shaft. If you hear this audio while driving, it could be thanks to worn couplings, damaged propshaft bearings, or damaged U-joints. In some situations, the knocking sounds can even be induced by a damaged U-joint. When this happens, you may possibly need to have to substitute the complete driveshaft, demanding a new one particular.

Upkeep costs

The cost of restoring a driveshaft varies commonly, depending on the type and trigger of the difficulty. A new driveshaft expenses between $three hundred and $1,300, including labor. Repairing a broken driveshaft can cost anywhere from $200 to $three hundred, depending on the time essential and the type of parts necessary. Signs and symptoms of a destroyed driveshaft incorporate unresponsiveness, vibration, chassis noise and a stationary car.
The first point to consider when estimating the cost of repairing a driveshaft is the sort of car you have. Some automobiles have more than one, and the components utilised to make them may not be compatible with other cars. Even if the exact same automobile has two driveshafts, the ruined kinds will expense far more. Fortunately, a lot of car mend retailers supply free of charge prices to mend destroyed driveshafts, but be conscious that such perform can be complicated and pricey.